Evaluation of Different Techniques and Materials for Filling in 3-dimensional Printed Teeth Replicas with Perforating Internal Resorption by Means of Micro-Computed Tomography.

INTRODUCTION: The aim of this study was to evaluate the filling ability of 2 obturation techniques in 3-dimensional (3D) printed teeth with perforating internal resorption (PIR). METHODS: A maxillary central incisor was instrumented and scanned by micro-computed tomographic (micro-CT) imaging. The 3D model was exported in the stereolithographic format and, with the aid of OrtogOnBlender software (Cícero Moraes, Sinop, SP, Brazil), a PIR in the middle third of the root canal was designed. Thirty-two replicas were printed in surgical resin and distributed into 4 groups (n = 8) according to the obturation technique and the material used: 2 groups used the hybrid technique, 1 with Bio-C Sealer (BCS; Angelus, Londrina, PR, Brazil)/gutta-percha (GP; VDW GmbH, Munich, Germany) + Bio-C Repair (BCR; Angelus, Londrina, PR, Brazil) and the other with BioRoot (BR; Septodont, Saint Maur des Fosses, France)/gutta-percha (GP) + Biodentine (BD; Septodont, Saint Maur des Fosses, France), and 2 groups used the incremental technique, 1 with BCR and the other with BD. Postobturation micro-CT imaging was performed to measure the percentage volume of voids and laser confocal microscopy to measure the surface roughness (µm) of the repair cements. Data were compared using analysis of variance and Kruskal-Wallis tests. RESULTS: Regarding the filling volume in the apical third, the BCS/GP + BCR (89.70 ± 5.15), BR/GP + BD (87.70 ± 8.43), and BCR (84.20 ± 9.00) groups showed the highest percentages compared with the BD group (69.70 ± 6.88) (P < .05). In the area of internal resorption, the BCS/GP + BCR (96.00 ± 2.64) and BCR (95.30 ± 2.93) groups showed the highest percentages compared with the BR/GP + BD group (91.50 ± 1.35) (P < .05). The BD group showed intermediate values that were sometimes similar to the BCS/GP + BCR and BCR groups and similar to the BR/GP + BD group (P > .05). Regarding the quality of the filling in the perforation area, the BCR group showed better results compared with the BD group (P < .001). Regarding roughness, the BCR group (1.66 ± 0.65) showed lower surface roughness compared with the BD group (2.51 ± 0.89) (P < .05). CONCLUSIONS: The capacity and quality of the filling in teeth with PIR were superior with the incremental technique with BCR and the hybrid technique with BCS/GP + BCR.

Chemical, morphological and microhardness analysis of coronary dentin submitted to internal bleaching with hydrogen peroxide and violet LED.

BACKGROUND: Violet LED has been used for internal bleaching, however its implications on coronary dentin composition are unclear. The present study aims to evaluate the effect of bleaching with violet LED, either associated with 35 % hydrogen peroxide or not, on microhardness, chemical composition, and morphological characteristics of coronal dentin. METHODS: Thirty maxillary canines were selected to obtain 30 blocks of coronal dentin, distributed in 3 groups (n = 10): 35 % hydrogen peroxide (HP); violet LED (LED); HP 35 % + LED, (HP+LED). The chemical analysis was performed by FTIR and the morphological evaluation of the dentin structure by confocal laser scanning microscopy before (T0) and after treatment (T1). The microhardness analysis was performed by microdurometer after bleaching. The data were submitted to repeated measures ANOVA test (P> 0.05). RESULTS: The intensity of the inorganic peaks decreased after bleaching for all groups (P = 0.003). There was an increase in the organic peak intensity after bleaching with HP, a decrease for LED, while HP+LED did not change the intensity (P = 0.044). Moreover, the inorganic/organic ratio decreased for HP (P = 0.022), while for LED and HP+LED there was no significant changes (P>0.05). HP and HP+LED showed lower microhardness values compared to LED (P< 0.05). Regarding morphological changes, an increase in the perimeter of the dentinal tubules was found for all groups, with the smallest increase being observed for LED. CONCLUSION: HP bleaching decreased the chemical stability and microhardness of the coronal dentin, while the violet LED treatments had no significant impact on dentin stability. In all groups, there was an increase in exposure of the dentinal tubules after bleaching, which was less pronounced with the violet LED bleaching.

Effect of Carbodiimide (EDC) on the Bond Strength Longevity of Epoxy Resin-based Endodontic Sealer to Root Dentin: An In-Vitro Study.

PURPOSE: EDC (1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride) can increase dentin bonding longevity. This study aimed to evaluate the effect of final irrigation of the root canal with EDC on the bond strength (BS) longevity of an epoxy resin-based root-canal sealer. MATERIALS AND METHODS: Twenty maxillary canines were sectioned and standardized for root length at 17 mm. Roots were instrumented and distributed into 2 groups according to the final irrigation protocol: EDTA 17%+NaOCl 2.5% (C) and EDTA 17%+NaOCl 2.5%+EDC 0.5M (EDC). The canals were dried and filled with AH Plus (Dentsply Sirona). Three slices were obtained per third, and the first slice from each third was used for the immediate push-out test (i) followed by analysis of the failure pattern (n = 10); the second slice from each third was used for the push-out test after 6-month aging (A) followed by analysis of the failure pattern (n = 10); the third slice from each third was used to examine the adhesive interface under confocal laser scanning microscopy (CLSM) (n = 10). Data were analyzed with ANOVA, Fisher's exact and Kruskal-Wallis tests. RESULTS: Higher BSs were found for EDC-A (5.6 ± 1.9) than for EDC-I (3.3 ± 0.7), C-i (2.5 ± 1.0) and C-i (2.6 ± 1.0) (p = 0.0001), while C-A values were in some cases similar to C-i and in others similar to EDC-i. No statistically significant difference was observed between the thirds (p > 0.05), except for EDC-i, which showed lower BS for the cervical (2.79 ± 0.46) compared to the apical third (3.8 ± 0.5), while the middle third in some cases had values similar to those of the apical and in others to the cervical third (3.2 ± 0.7) (p = 0.032). More mixed adhesive failures were found in the cervical third, and more adhesive failures to the sealer occurred in the middle and apical thirds (p = 0.014). A significant difference was observed between treatments in terms of adaptation of the adhesive interface, with a higher percentage of good adaptation using EDC (66.7%) than using C (40%), and a lower percentage of poor adaptation with EDC (10%) compared to C (20%) (p < 0.05). CONCLUSION: Root canal irrigation with EDC increased the longevity of the adhesive interface of an epoxy resin-based root-canal sealer.

Bleaching effect of violet LED of 405-410 nm on stained endodontically treated teeth.

AIM: To evaluate in vitro the whiteness index (WID) and the whiteness index variation (ΔWID), as well as the color stability of stained endodontically treated teeth after bleaching with violet LED (VL) and with hydrogen peroxide 35% (HP) associated or not to VL. METHODS: Twenty-four lower incisors were selected. The color was measured using a spectrophotometer at the following times: baseline, after staining, bleaching, and thermocycling, to determine the whiteness index and variation (WID and ΔWID). For the staining process, the teeth were immersed in human blood and centrifuged. After biomechanical preparation, the specimens were distributed into three groups (n = 8): control group (HP); violet LED (VL); and HP 35% + VL (HP+VL), and one session was performed for both bleaching procedures every week for three weeks, followed by thermocycling, where 10,000 cycles were performed. After color analysis, the data obtained were submitted to statistical analysis (RM ANOVA, p < 0,05). RESULTS: The staining of the teeth reduced the WID values for all experimental groups compared to baseline, and the bleaching protocols increased WID values, with the lowest WID values for group VL. There was no statistically significant difference after thermocycling for all groups compared to bleaching. Staining and thermocycling reduced the ΔWID values, and no difference was found between treatments at these assessment times. Bleaching increased the ΔWID values, with less pronounced changes in the VL group. CONCLUSION: VL used alone has a lower bleaching effect compared to the bleaching treatment with HP, whether or not associated with VL, and the color stability was observed for all groups.